Electric mosquito swatter circuit schematic

Industrial Router Crystal 3.2*2.5mm 3225 26M (26.000MHZ) 12PF 10PPM 20PPM 30PPM
inductance
SMD aluminum electrolytic capacitor

Electric mosquito swatter circuit principle

The circuit is mainly composed of a high frequency oscillation circuit, a triple voltage rectifier circuit and a high voltage power grid.
When the power switch SB is pressed, the high frequency oscillator composed of the triode VT and the high frequency transformer TU is energized, and the 3 V direct current is converted into a high frequency alternating current of about 18 kHz, boosted to about 600 V by the TU, and then The three-voltage rectification of the diodes VD2 to VD4 and the capacitors C1 to C3 is raised to about 1500 V, and is applied to the metal net of the mosquito swatter. When mosquitoes touch the metal mesh, the grid is short-circuited, and the mosquitoes are stunned and killed by powerful currents.
In the circuit, the red LED HR and the current limiting resistor R form an indicator circuit for indicating the on/off state of the circuit and displaying the loss of battery power.



Tin Zinc Alloy Wire

Tin zinc alloy wire is a kind of electronic welding material speciallized for metal spraying of the end face of metalized film capacitor.The capacitors have been widely used in high-speed rail,automobiles,new energy and aerospace fields.

Application Fields: Metal spraying material is a kind of electronic welding material specialized for metal spraying of the end face of metalized film capacitor.



Tin Zinc Alloy Wire,Zinc Alloy Wire,Tin Zinc Alloy Soldering Wire,Alloy Wire

Shaoxing Tianlong Tin Materials Co.,Ltd. , https://www.tianlongspray.com