At present, the domestic LED package mainly adopts the traditional potting process, and directly applies fluorescent glue on the surface of the chip. This way, the spherical crown-shaped phosphor coating has obvious structural defects (inconsistent thickness from the center to the edge). Moreover, regardless of manual or machine operation, the phosphor layer of the same batch of LED light source will have a certain difference in shape, it is difficult to control uniformity and consistency, and will bring a large chromaticity difference between LED light sources; Due to the unevenness of the microscopic surface of the fluorescent rubber coating, the difference between the individuals is large. When the light is incident, unevenness of the white light color is formed, resulting in uneven yellow spots or partial blue spots.
The difference between the chip-level light source and the traditional package is that the traditional package is a single method of powdering and sealing to complete the packaging process, and the chip-level light source adopts spraying, molding and other processes to complete the related packaging process, and the single-step process simultaneously completes multiple packages. The packaging of the light source can overcome the defects of light color unevenness and different light distribution caused by the above single dispensing process. Moreover, under the same area, the package density of the chip-scale light source is increased by 16 times, and the final package volume is 80% smaller than the conventional one, and the luminaire design space is larger.
Chip-level white LED light sources without gold wires generally go through five fabrication steps, as shown.
Step 1: Flip the bonding
Flip-bonding is a process of combining a blue LED chip with a ceramic substrate. The principle of the combination is ultrasonic thermo-compression bonding, that is, the LED chip is pressure-bonded to the corresponding electrode of the ceramic substrate while ultrasonic heating is applied. In order to ensure a good bond between the chip and the substrate, it is necessary to provide a metal bump solder ball on the chip or the substrate in advance, and it is necessary to ensure that the ultrasonic soldering temperature reaches 160 ° C. The chip and substrate combined by flip-chip bonding have an electrode contact area of ​​about 60% of the chip area, and the chip thrust is more than 2000g. The stable combination will provide a good channel for conduction and heat conduction, thereby ensuring high current use. Stable and long-term work is reliable.
Step 2: Spray phosphor
This is the first key technology in chip-scale packaging. First, a steel mesh is placed on a ceramic substrate with a chip. The hole on the steel mesh corresponds to the position of the chip on the ceramic substrate, and then pre-distributed using a professional phosphor sprayer. A good fluorescent glue is sprayed onto the ceramic substrate on which the steel mesh is placed, and after the spraying, the steel mesh is taken away to prepare a uniform and uniform phosphor coating on the chip of the entire ceramic substrate. In order to ensure the uniformity of the color of the white light source on the entire ceramic substrate, the chip needs to be sorted before the flip-chip bonding, and the phosphor layer can be more uniform by spraying multiple times during the spraying.
Step 3: Molding the lens
This is the second key technology of the chip scale package. The whole ceramic substrate coated with fluorescent glue is sent into the cavity of the Moldin g (molding) machine, and the packaged silica gel is injected into the mold to heat the mold. After the silica gel is cured, the lens Moklin g of the entire ceramic substrate can be completed after demolding. Precision molds and a stable demolding process are key to ensuring a consistent silicone lens.
Step 4: Cutting
After the LED package on the entire ceramic substrate is completed, the cutting separation is required for the next test. The cutting process of ceramic sheets mainly includes blade cutting and laser cutting. The process is relatively simple, and the focus is on avoiding damage to the silicone lens.
Step 5: Test and pack
The specifications that need to be tested and classified mainly include the following, operating voltage, luminous flux, color temperature, and color rendering index. Products of the same specification are packaged together in a tape and reel, compatible with subsequent automated placement processes.
Plastic Coated Electric Kettle
The original stainless steel double wall Electric Kettle. This kettle comes with 100% stainless steel interior. Outside made by plastic for protect your hand in case that the hot stainless steel will scald your hand. No plastic in contact with hot water. The spacious kettle has a volume of 1.8 liters which give ample space to boil tea, coffee or soups in minutes. Lets you boil a huge quantity of liquid at a time and helps save time and electricity.
· Stainless Steel Body With Plastic Outside: Ergonomic in design, the electric kettle has a sturdy handle with smart contours to make your grip a firmer one. The stainless steel finish gives a glossy feel and boasts a rust-free performance. This stainless electric kettle comes with a convenient spout so that liquid can be easily poured from it directly into a container. It avoids any spillage and thus prevents your kitchen from getting messy.
· 360 degree rotational body with separated base: Enjoy the ease and convenience of cord-free serving with this stylish stainless steel kettle. Perfect for placing on the table for gatherings or leaving on the base for worry-free hot water any time of day.
· Automatic shut off when water boils or dry: This overheat safety protection feature of the electric Kettle helps to prevent hazardous accidents. The cordless electric kettle switches off if the water inside the kettle dries up. It also saves on electricity as it uses very less power.
· Lightweight and Portable: Carry your kettle anywhere to enjoy a warm cup of coffee or tea away from your home. Kettle not only looks good but maintains a high standard in terms of durability. Lightweight and its small dimensions snugly fit in your bag. Portable and small in size, this electric kettle makes a perfect travel companion.
· Cool touch Exterior: With out cool-touch design. You`ll be able to touch the outside of the kettle even when it`s boiling. There`s no risk of getting accidentally burnt, so it`s perfect for homes with young children.
Application:
Enjoy your coffee.
Cook egg for morning.
Boil some lemon tea
Plastic Coated Electric Kettle
Plastic Coated Electric Kettle,Household Plastic Kettle,Colorful Water Kettle,Auto Shut-Off Electric Kettle
Guangzhou Taipeng Electrical Appliances Technology CO., LTD. , https://www.taipengelectrics.com