NT HRC Fuse is light in weight, small in size, low in power, loss and high in breaking capacity.
Standard IEC269 VDE0636
NT Low Voltage Fuse and Base
Application
NT low voltage H. R. C. Fuse is light in weight, small in size, low in power, loss and high in breaking capacity. This product has been widely used in overload and short circuit protection of electric installations.
This product conforms to IEC 269 and VDE0636 standards with all of the rating at the world advanced level.
| Type | Fuse Link | Fuse Base | |||||
|
Rated Current (A) Â |
Rated Voltage (V) Â |
Rated Power Loss(W) Â |
Weight (Kg) Â |
Type |
Rated Current (A) Â |
Weight (Kg) Â |
|
| RT16-000/NT00C Â |
2 | 500,690 | 0.41 | 0.15 | Sist101 | 160 | 0.2 |
| 4 | 0.62 | ||||||
| 6 | 0.81 | ||||||
| 10 | 1.08 | ||||||
| 16 | 1.60 | ||||||
| 20 | 1.81 | ||||||
| 25 | 2.31 | ||||||
| 32 | 3.07 | ||||||
| 36 | 3.17 | ||||||
| 40 | 4.05 | ||||||
| 50 | 4.25 | ||||||
| 63 | 4.70 | ||||||
| 80 | 5.7 | ||||||
| 100 | 7 | ||||||
| RT16-00/NT0 | 10 | 500,690 | 1.42 | 0.2 | Sist101 | 160 | 0.32 |
| 16 | 2.45 | ||||||
| 20 | 2.36 | ||||||
| 25 | 2.7 | ||||||
| 32 | 3.74 | ||||||
| 35 | 4.3 | ||||||
| 40 | 4.7 | ||||||
| 50 | 5.5 | ||||||
| 63 | 6.9 | ||||||
| 80 | 7.6 | ||||||
| 100 | 8.9 | ||||||
| 125 | 500 | 10.1 | |||||
| 160 | 15.2 | ||||||
| RT16-1/NT1 | 80 | 500,690 | 6.2 | 0.36 | Sist201 | 250 | 0.8 |
| 100 | 7.5 | ||||||
| 125 | 10.2 | ||||||
| 160 | 13 | ||||||
| 200 | 15.2 | ||||||
| 224 | 500 | 16.8 | |||||
| 250 | 18.3 | ||||||
| RT16-2/NT2 | 125 | 500,690 | 6.9 | 0.65 | Sist401 | 400 | 1.2 |
| 160 | 11.5 | ||||||
| 200 | 15 | ||||||
| 224 | 16.6 | ||||||
| 250 | 18.4 | ||||||
| 300 | 21 | ||||||
| 315 | 19.2 | ||||||
| 355 | 24.5 | ||||||
| 400 | 26 | ||||||
| 415 | 21.7 | ||||||
| RT16-3/NT3 | 355 | 500,690 | 22.7 | 0.85 | Sist601 | 630 | 1.5 |
| 400 | 26.8 | ||||||
| 425 | 28.9 | ||||||
| 500 | 500 | 32 | |||||
| 630 | 40.3 | ||||||
| RT16-4/NT4 | 800 | 380 | 62 | 1.95 | Sist1001 | 1000 | 3.45 |
| 1000 | 75 | ||||||
TO-220 Transistor Outline Package is a type of in-line package often used in high-power transistors and small and medium-sized integrated circuits.
It not only plays the role of mounting, fixing, sealing, protecting the chip and enhancing the electrothermal performance, but also connects to the pins of the package shell with wires through the contacts on the chip, and these pins pass through the wires on the printed circuit board. Connect with other devices to realize the connection between the internal chip and the external circuit.Because the chip must be isolated from the outside world to prevent impurities in the air from corroding the chip circuit and causing electrical performance degradation. On the other hand, the packaged chip is also easier to install and transport.
TO-220 package is a kind of in-line package that is often used for fast recovery diodes. TO-220AC represents a single tube with only two pins and only one chip inside.
The diodes are packaged in TO-220AC and can be used in switch mode power supplies (SMPS), power factor correction (PFC), engine drives, photovoltaic inverters, uninterruptible power supplies, wind engines, train traction systems, electric vehicles and other fields.
TO-220 package,Super Fast Recovery Rectifiers,Fast Rectifiers Diode,Ultra Fast Rectifiers
Changzhou Changyuan Electronic Co., Ltd. , https://www.changyuanelectronic.com