The IP core verification platform uses ALTERA Cyclone series FPGA, model EP1C12Q240C8, which provides over 300,000 gates of system resources and 240k bit of internal high-speed FIFO, as well as two internal high-speed PLLs that can synthesize 10M to 200M system core clocks. For high-speed LVDS differential interfaces, large-scale applications can be optimized by QUARTUS design tools to achieve system operating frequencies in excess of 100MHz, meeting the needs of most users, and cost-effective.
The IP core verification platform adopts a 6-layer PCB design and uses an independent external clock synchronization chip to provide a stable zero-delay clock system circuit for PCI and other interfaces, meeting the clock requirements of the PCI bus, and making the verification platform high-speed, stable, and reliable. jobs.
S1500 hardware verification board photo
The following is a detailed description of the IP core provided by the IP core verification platform:
Function 0 PCI Bridge Device
Full VHDL, VERILOG source code design is provided, no time limit;
Support PCI bus bridge specification 1.1 protocol;
Support PCI bus specification 2.3 protocol;
Plug and play, no driver required, standard PCI bridge function;
Support PCI configuration mode 0, configuration mode 1;
Support PCI configuration space, IO space, memory space access;
Support PCI VGA device and ISA bridge function;
Support for PCI interrupts and 4 BUSMASTER (DMA) devices;
Support PCI delayed transfer, RETRY re-entry function;
The internal PCI read and write FIFOs are each 512 bytes, and 4 PCI read and write request queues;
Internal integrated rotation priority arbitration structure, fair PCI master priority setting;
PCI burst mode, 133 Mbytes/second data peak transmission;
Function 1, 2 16C950 high speed serial port IP core design
Full VHDL source code design, modular interface design, can be ported to non-
High voltage Vacuum circuit breaker is an indoor power distribution device in the 3~10kV, 50Hz three-phase AC system, which can be used for the protection and control of electrical equipment in industrial and mining enterprises, power plants, and substations. It is especially suitable for places requiring oil-free, less maintenance and frequent operation. The circuit breaker can be configured in the central cabinet, double-layer cabinet, and fixed cabinet to control and protect high-voltage electrical equipment.
Specifications:
1.Vacuum circuit breakers can usually be divided into several voltage levels. Low-voltage type is generally used for explosion-proof electrical use. Like coal mines and so on.
2.The rated current reaches 5000A, the breaking current reaches 50kA, and the voltage has reached 35kV.
Voltage parameters
Rated voltage: kV 10, maximum voltage: 11.5
Insulation level: power frequency withstand voltage, pole to ground: 42
Between fractures: 48
Impulse withstand voltage between poles, pole to ground: 75
Between fractures: 84
Current parameter Rated current A; 1250 1250 3150
Rated short-circuit breaking kA: 20 31.5 40
Rated peak withstand current kA: 50 80 100
4S short-time withstand current kA: 20 31.5 40
Rated short-time closing current (peak) kA 50 80 100
Rated breaking current of single capacitor bank A: 630 800
Rated back-to-back capacitor bank breaking current A: 400 400
Service life Rated short-circuit breaking current times: 50 50 30
Mechanical life times: 10000
Other rated operation sequence: opening - 0.5s - closing - opening - 180s - closing - opening - 180s - closing - opening - 180s - closing - opening
Total breaking times: no more than 60
Equipped with operating mechanism CD or CT machine
Outdoor high voltage switchgear, Outdoor Pole breaker, High voltage isolation switch,high voltage isolation switches,Outdoor vacuum circuit breaker
Henan New Electric Power Co.,Ltd. , https://www.newelectricpower.com