San Jose, California, July 26, 2016 - Cypress Semiconductor Corp. (Nasdaq: CY) today announced the launch of a new automotive LED driver, not only reduces the headlamp system size, but also increase the cost benefit. The car's LED-driven model, the S6BL112A, is the industry's first product to achieve simultaneous control with industry-leading conversion efficiency to ensure stable lighting system performance. The device is capable of driving LEDs at a 2.1MHz switching frequency, enabling a compact solution that uses small, inexpensive inductors to reduce the physical size of the system and reduce bill of materials (BOM). Together with Cypress's TraveoTM microcontrollers (MCUs) and power management ICs (PMICs), the LED driver forms the industry's best automotive headlamp lighting solution.
The Cypress S6BL112A automotive LED driver has an input voltage range of 4.5-42 V and can be used in a variety of extreme operating conditions, such as cold start (the engine engine causes excessive current during cold start) and load dump (disconnected during engine operation) Battery, surge voltage when powered by an alternator). The LED driver also helps optimize electrical system protection design with system safety features such as underload current sensing, overload current and voltage protection, and shields for offensive LED OPEN diagnostics during cold starts. In addition, its synchronous operation eliminates the dimming instability caused by low input voltage. For more information on Cypress's automotive LED drivers, please visit http://TIve-led.
Kiyoe Nagaya, vice president of Cypress's Analog Business Unit, said: "With the rapid adoption of LED lighting systems in cars and other vehicles, automotive suppliers strive to minimize system performance without compromising performance or reliability. Requires component count and lower production costs. Cypress's automotive LED drivers, complemented by our automotive microcontrollers and power management ICs (PMICs), provide a compact and efficient headlight solution, even at extreme temperatures or destructive Under the electrical noise conditions, it can also show stable performance."
The S6BL112A is a single-channel 2A output Buck LED driver that supports analog and PWM dimming for precise control of light levels. Its switching frequency can be set between 205 kHz and 2.1 MHz with an output current accuracy of +/- 2%. The device does not require an external filter to perform rising slope control, which reduces the generation of electromagnetic interference that can damage peripheral devices.
Availability
The new S6BL112A LED driver is sampling now and is expected to be in production in the fourth quarter of 2016 in a thermally enhanced 16-lead TSSOP package.
Cypress helps build the most advanced automotive systems
Cypress works with leading automotive manufacturers around the world to create cutting-edge automotive systems that are standard on luxury and mainstream models, including Advanced Driver Assistance Systems (ADAS), 3D graphics displays and full-featured touch screens. The combination of Cypress and Spansion has created the industry's third-largest supplier of automotive memory and microcontroller (MCU) offering a richer product portfolio including TraveoTM MCU Series, Power Management IC (PMIC), PSoC ® Programmable System-on-Chip Solutions, CapSense® Capacitive Sensing Solutions, TrueTouch® Touch Screens, LED Drivers, NOR Flash, SRAM and F-RAMTM Storage, and USB, Wi-Fi and Bluetooth Wireless Connectivity Solutions. The strong product portfolio is based on Cypress's zero defect and commitment to providing world-class service, as well as the most stringent ISO/TS 16949 quality management system, Automotive Electronics Council (AEC) IC and Production Part Approval Process (PPAP) guidelines. Compliance with industry standards. For more information, please visit: TIve.
About Cypress
Founded in 1982, Cypress provides the core high performance, high quality solutions for today's most advanced embedded systems for a wide range of automotive, industrial, home automation and appliance, consumer electronics and medical devices. Cypress offers programmable system-on-chips, general-purpose microcontrollers, analog ICs, wireless and USB connectivity solutions, and reliable high-performance memory to help engineers design differentiated products and bring them to market first. Cypress is committed to providing customers with the best support and design resources to help technology innovators disrupt the market in the shortest possible time and create new product categories. For more information, please visit:
CNC Machining Service, Medical Parts CNC Machining Service, High Precision Parts CNC Machining Service
ShenZhen Haofa Metal Precision Parts Technology Co., Ltd. , http://www.haofametals.com