A person familiar with the industry told Gao Gong LED reporter that the bosses of the two companies have already evaporated from the world, and it is estimated that nearly 100 million yuan will be collected. The registered names of the two companies are all fake, and the "China Merchants" supplier expressed very angry.
There have been many discussions on the Internet, and opinions have been mixed. Some netizens said that they are all doing low-end running. Will you dare to use low-cost LED lights in the future? Some netizens said, "No, many factories don't pay this year, but they don't want to run the road?" There are even netizens who ridicule, this will not go to the LED running season again. In previous years, the peak period was in the National Day. During the holiday period, it seems that this time is ahead of schedule. It is estimated that there will be a running tide after May Day.
"LED is in the transition period from chaos to governance. The failure of manufacturers of inferior and low-priced products has just given the space for high-quality brand enterprises to break through." An industry insider admitted that a 3 yuan LED bulb, this kind of Products with no price limit are difficult to talk about, and few dealers are willing to sell. Even if there is sales, the profit inside is very limited.
Wu Jie, general manager of Shenzhen Delip Optoelectronics Co., Ltd., said in an interview with Gaogong LED that the main problem in the LED industry is to make the products well and recover the money.
Business owners run the road, which is in every industry, but it seems that the LED industry has a lot of roads. Since the National Day of 2011, Chairman Mao Guozhen of Shenzhen Haoduoli Industrial Co., Ltd. has set a precedent for “running the road†in the industry. The word “running the road†has become a hot word in the LED industry.
Running the road not only reflects the integrity of the LED industry, but also requires all companies in the industry to pay attention to their own integrity issues and jointly establish a good business environment. At the same time, it also reflects the degree of chaos in the industry. This requires LED companies to pay more attention to their product development and avoidance. Bad price wars, leading the healthy development of the industry with technological innovation.
Porcelain Station Post Insulator according to IEC, ANSI and other standards are used in substations and related switching equipment. Station Post Ceramic Insulator are produced in single piece up to 2300 mm and can operate voltages up to 1100KV in stacked configuration. High Voltage Station Post Insulator are subjected to compression, cantilever and torsional loads during service. Station Post Insulator for high voltagr use semiconductor glazes, so you don't have to worry about salt deposits or corona discharges.
Product Description
1.Material: Porcelain
2.Improved contamination performance
3.Widely applied to the line of different voltage classes
4.With features of good insulation performance
5.Long lasting durability
| MAIN DIMENSIONS AND STANDARD PARTICULARS | |
| Type | C4-125 |
| Creepage distance(mm) | 430 |
| Dry arcing distance(mm) | 200 |
| Cantilever strength(KN) | 4 |
| Tension Strength(KN) | 38 |
| Torsion strength(N.m) | 800 |
| Power frequency flashover wet voltage(KV) | 50 |
| Impulse withstand voltage(KV) | 125 |
| Net weight(KG) | 9 |
| MAIN DIMENSIONS AND STANDARD PARTICULARS | |||
| ANSI Class | TR-205 | TR-208 | TR-210 |
| Creepage Distance/mm | 394 | 610 | 940 |
| Cantilever Strength/kn | 8.9 | 8.9 | 8.9 |
| Tensile Strength/kn | 38 | 44.5 | 53 |
| Torsional Strength/k.m | 791 | 904 | 1130 |
| Compression Strength/kn | 44.5 | 44.5 | 66.7 |
| Low Frequency Dry Flashover Voltage/kv | 85 | 110 | 145 |
| Low Frequency Wet Flashover Voltage/kv | 55 | 75 | 100 |
| Critical Impulse Flashover Voltage, Pos/kv | 125 | 170 | 225 |
| Critical Impulse Flashover Voltage, Neg/kv | 200 | 250 | 290 |
| Low Frequency Dry Withstand Voltage/kv | 50 | 70 | 95 |
| Low Frequency Wet Withstand Voltage/kv | 45 | 60 | 80 |
| Impulse Withstand Voltage/kv | 110 | 150 | 200 |
| Net Weight/kg | 7 | 11 | 16 |
| Applicable Standard | ANSI C29.9 | ANSI C29.9 | ANSI C29.9 |
We warmly welcome friends both domestic and abroad to visit our company, if you have any questions, please contact with us directly.
Station Post Insulator
Station Post Insulator,Station Post Ceramic Insulator,High Voltage Station Post Insulator,Post Insulator For High Voltage
FUZHOU SINGREE IMP.& EXP.CO.,LTD. , https://www.cninsulators.com