Product description
Â
PRODUCT SPECIFICATION CAT.6A SFTP LAN CABLE 23AWGX4P | |||||
Cross Section | Perfomance | ||||
Marking | ELECTRICAL CHARACTERISTICS(20ºC) MAX.CONDUCTOR DC RESISTANCE ( ohm/KM) #23 93.8 INSULATION RESISTANCE     Min.5000MΩ*km DIELECTRIC STRENGTH    1000V dc/ 2 seconds RESISTANCE UNBALANCE:MAX               2% CAPACITANCE UNBALANCE:MAX. 160PF/100M INPUT IMPEDANCE: 1-100MHZ  100+/-15ohm 100-250MHz  100+/-22ohm ;250-500MHz 100+/-22ohm MEAN CHARATRERISTIC IMPEDANCE@100MHZ: 100+/-15 OHMS NOMINALE VELOCITY OF PROPAGETION(NVP)  75+/-2% PROPAGATION DELAY @ 100MHZ      >=537.6 ns/100M PROPAGATION DELAY SKEW:MAX.     >=45ns/100M |
||||
Jacket Marking:Â Â Â Â Â Â Â Â Â Â Â Â Â / | |||||
Construcetion | |||||
Conductor                     Bare Copper 4 Twisted Pair                   8C AWG                              23 Construction (MM)              1/0.57 Stranded Dia.(MM)            0.57±0.008 Insulation                   Form-Skin PE Nom.Thickness (MM)           0.235±0.02 Insulation Dia.( ±0.05)         1.4 Sepaiaior                         / Shield/Braid AL-Mlary and tinded (AL/MY) Jacket                     PVC Nom.Thickness (MM)         0.6 Outer Dia.( ±0.3MM)       7.6 |
f(MHZ) | ATT(dB), MIN |
PSNEXT(dB),MIN | NEXT(dB),MIN | |
1 | 2.1 | 72.3 | 74.3 | ||
10 | 5.9 | 57.3 | 59.3 | ||
100 | 19.1 | 42.3 | 44.3 | ||
200 | 27.6 | 37.8 | 39.8 | ||
250 | 31.1 | 36.3 | 38.3 | ||
300 | 34.3 | 35.1 | 37.1 | ||
400 | 40.1 | 33.3 | 35.3 | ||
500 | 45.3 | 31.8 | 33.8 | ||
Physical Properties |
Insulation |
Tens strength(before aging) |
Kgf/mm2 |
>0.816 |
|
PVC Color        Assorted upon request | Tens strength(after aging) | Kgf/mm2 |
 |
||
Insulation Cores:Pairs P1:BL & WHÂ Â P2:OR & WH P3:GN & WHÂ Â P4:BRN & WH Jacket |
Elongation(before aging) |
% |
>100% |
||
Elongation(after aging) | % |
 |
|||
Jacket | Tens strength(before aging) | Kgf/mm2 | >1.407 | ||
Tens strength(after aging) | Kgf/mm2 | >75% | |||
Elongation(before aging) | % | >100% | |||
benging test MAX.pulling |
Elongation(after aging) | % | >50% | ||
Insulation shrinkback |
 |
121ºC x1hr |
|||
Insulation cold bend |
 |
-20ºCx4hr | |||
Jacket cold bend |
 |
-20ºCx4hr |
PRODUCT PROCESS
HOW TO CHOOSE CAT5E AND CAT6?
Â
Structure: | Cat5e UTP: | (1P+PE)*4+Rip cord+PVC |
Cat5e FTP: | (1P+PE)*4+Mylar&Foil+earth wire +PVC | |
Cat5e SFTP: | (1P+PE)*4+Mylar&Foil+earth wire +Braid+PVC | |
Cat6 UTP: | (1P+PE)*4+Rip cord+cross+PVC | |
Cat6 FTP: | (1P+PE)*4+Mylar&Foil+earth wire +cross+PVC | |
Cat6 SFTP: | (1P+PE)*4+Mylar&Foil+earth wire +Braid+cross+PVC | |
Cat6a/Cat7 SFTP: | (1P+PE+Foil)*4+(Mylar&Foil)+earth wire +Braid+PVC | |
Conduct material: | TC: | Tinned copper, the cost is the highest, but it has good oxidation resistance. |
BC: | Bare copper, it is the most commonly used. | |
CCA: | It is made of copper and aluminum, it is just half price of bare copper. | |
CCS: | It is made of copper and steel. |
Â
Comparison of UTP / FTP / SFTP | |||
Price | High | SFTP>>FTP>>UTP | Low |
Flexible | Flexible | UTP>>FTP>>SFTP | Inflexible |
Disturbance resistant | Good | SFTP>>FTP>>UTP | Bad |
Comparison of Cat5e & Cat6 | ||
 |
Cat5e | Cat6 |
Maximum length | 100m | 100m |
Bandwidth | 100Mhz | 250Mhz |
Disturbance resistant | Normal | Good |
Suitable for | 100BASE-TX (Fast Ethernet) | 1000BASE-T (Gigabit Ethernet) |
Diameter | 5.2mm | 5.8mm |
Theoretical download | 12.8 M/s | 128 M/s |
Why choose us
a. Clean And Tidy Workshop + Skilled Workers.
b. Advanced test facilities + Test + Certification = Quality Guarantee !
           Ensure you use our products worry-free.
c. Competitive price, save your money.
d. Full range products, offer you one-stop purchase, save your time, save your delivery cost.
Company information
Â
Â
Lulink is an export organization specialized in developing, designing, producing network intelligent wire and telecommunication equipments, the products range consists of main categories and metal sheeting, Lulink is supported by a strong R&D team which has more than three years experience in the field of technology and integrating brilliant designers, technicians, support groups, sales and marketing organizations. We offer and accept OEM/ODM service to customers.Â
We can do the project case as well, and have successfully finished dozens of competitive tender in South Africa, Middle east, Asia and so on, involved the cross connection cabinet, Optic fiber cable etc. We can offer you theTechnical Support, Installation & Training and the best After-sales service.
Our Main products:
Copper System: LAN cables, Adaptor, Connector and Spliter, Cabinet, PATCH CORD, TOOLS, Coaxial cablesÂ
Fiber Optic: fiber optic patch cord, PLC splitter, adapter, connector, closure, media converter, etc
Cable Assembly: USB cable, HDMI cable, VGA cable, AV cable, DVI cable, etc
All has been certified by ISO9001:2008/ROHS/CE/UL/3C and so on.
FAQ
Q1. How can we know the products' quality?
We suggest you to buy a sample product first before placing a big order. Or you could talk to us online or send us an email if you need more detailed information for the specific product.
Q2. How about the sample fee and sample time?
For sample order, it is about 3-7 working days. As for sample fee is charged according to the size of the product.
Q3: Can you help me make my own design?
Yes, Sure. We can make OEM and ODM items for you as long as you can tell us your idea or provide pictures. We have done many OEM projects for our customers.
Q4. What is your payment term?Â
A. T/T, L/C, Western Union, money gram and PayPal are all accepted.Â
B. For bulk production: 30% deposit pay before mass production, and 70% pay before shipment.
Q5. Can we visit your factory?
Yes, you can. You are most welcome to visit our factory and office. Please let us know before coming over and we will provide detailed route and hotel booking suggestions. Cat 6A SFTP lan cable solid 4pairs network cable
Product description
Â
PRODUCT SPECIFICATION CAT.6A SFTP LAN CABLE 23AWGX4P | |||||
Cross Section | Perfomance | ||||
Marking | ELECTRICAL CHARACTERISTICS(20ºC) MAX.CONDUCTOR DC RESISTANCE ( ohm/KM) #23 93.8 INSULATION RESISTANCE     Min.5000MΩ*km DIELECTRIC STRENGTH    1000V dc/ 2 seconds RESISTANCE UNBALANCE:MAX               2% CAPACITANCE UNBALANCE:MAX. 160PF/100M INPUT IMPEDANCE: 1-100MHZ  100+/-15ohm 100-250MHz  100+/-22ohm ;250-500MHz 100+/-22ohm MEAN CHARATRERISTIC IMPEDANCE@100MHZ: 100+/-15 OHMS NOMINALE VELOCITY OF PROPAGETION(NVP)  75+/-2% PROPAGATION DELAY @ 100MHZ      >=537.6 ns/100M PROPAGATION DELAY SKEW:MAX.     >=45ns/100M |
||||
Jacket Marking:Â Â Â Â Â Â Â Â Â Â Â Â Â / | |||||
Construcetion | |||||
Conductor                     Bare Copper 4 Twisted Pair                   8C AWG                              23 Construction (MM)              1/0.57 Stranded Dia.(MM)            0.57±0.008 Insulation                   Form-Skin PE Nom.Thickness (MM)           0.235±0.02 Insulation Dia.( ±0.05)         1.4 Sepaiaior                         / Shield/Braid AL-Mlary and tinded (AL/MY) Jacket                     PVC Nom.Thickness (MM)         0.6 Outer Dia.( ±0.3MM)       7.6 |
f(MHZ) | ATT(dB), MIN |
PSNEXT(dB),MIN | NEXT(dB),MIN | |
1 | 2.1 | 72.3 | 74.3 | ||
10 | 5.9 | 57.3 | 59.3 | ||
100 | 19.1 | 42.3 | 44.3 | ||
200 | 27.6 | 37.8 | 39.8 | ||
250 | 31.1 | 36.3 | 38.3 | ||
300 | 34.3 | 35.1 | 37.1 | ||
400 | 40.1 | 33.3 | 35.3 | ||
500 | 45.3 | 31.8 | 33.8 | ||
Physical Properties |
Insulation |
Tens strength(before aging) |
Kgf/mm2 |
>0.816 |
|
PVC Color        Assorted upon request | Tens strength(after aging) | Kgf/mm2 |
 |
||
Insulation Cores:Pairs P1:BL & WHÂ Â P2:OR & WH P3:GN & WHÂ Â P4:BRN & WH Jacket |
Elongation(before aging) |
% |
>100% |
||
Elongation(after aging) | % |
 |
|||
Jacket | Tens strength(before aging) | Kgf/mm2 | >1.407 | ||
Tens strength(after aging) | Kgf/mm2 | >75% | |||
Elongation(before aging) | % | >100% | |||
benging test MAX.pulling |
Elongation(after aging) | % | >50% | ||
Insulation shrinkback |
 |
121ºC x1hr |
|||
Insulation cold bend |
 |
-20ºCx4hr | |||
Jacket cold bend |
 |
-20ºCx4hr |
PRODUCT PROCESS
HOW TO CHOOSE CAT5E AND CAT6?
Â
Structure: | Cat5e UTP: | (1P+PE)*4+Rip cord+PVC |
Cat5e FTP: | (1P+PE)*4+Mylar&Foil+earth wire +PVC | |
Cat5e SFTP: | (1P+PE)*4+Mylar&Foil+earth wire +Braid+PVC | |
Cat6 UTP: | (1P+PE)*4+Rip cord+cross+PVC | |
Cat6 FTP: | (1P+PE)*4+Mylar&Foil+earth wire +cross+PVC | |
Cat6 SFTP: | (1P+PE)*4+Mylar&Foil+earth wire +Braid+cross+PVC | |
Cat6a/Cat7 SFTP: | (1P+PE+Foil)*4+(Mylar&Foil)+earth wire +Braid+PVC | |
Conduct material: | TC: | Tinned copper, the cost is the highest, but it has good oxidation resistance. |
BC: | Bare copper, it is the most commonly used. | |
CCA: | It is made of copper and aluminum, it is just half price of bare copper. | |
CCS: | It is made of copper and steel. |
Â
Comparison of UTP / FTP / SFTP | |||
Price | High | SFTP>>FTP>>UTP | Low |
Flexible | Flexible | UTP>>FTP>>SFTP | Inflexible |
Disturbance resistant | Good | SFTP>>FTP>>UTP | Bad |
Comparison of Cat5e & Cat6 | ||
 |
Cat5e | Cat6 |
Maximum length | 100m | 100m |
Bandwidth | 100Mhz | 250Mhz |
Disturbance resistant | Normal | Good |
Suitable for | 100BASE-TX (Fast Ethernet) | 1000BASE-T (Gigabit Ethernet) |
Diameter | 5.2mm | 5.8mm |
Theoretical download | 12.8 M/s | 128 M/s |
Why choose us
a. Clean And Tidy Workshop + Skilled Workers.
b. Advanced test facilities + Test + Certification = Quality Guarantee !
           Ensure you use our products worry-free.
c. Competitive price, save your money.
d. Full range products, offer you one-stop purchase, save your time, save your delivery cost.
Company information
Â
Â
Lulink is an export organization specialized in developing, designing, producing network intelligent wire and telecommunication equipments, the products range consists of main categories and metal sheeting, Lulink is supported by a strong R&D team which has more than three years experience in the field of technology and integrating brilliant designers, technicians, support groups, sales and marketing organizations. We offer and accept OEM/ODM service to customers.Â
We can do the project case as well, and have successfully finished dozens of competitive tender in South Africa, Middle east, Asia and so on, involved the cross connection cabinet, Optic fiber cable etc. We can offer you theTechnical Support, Installation & Training and the best After-sales service.
Our Main products:
Copper System: LAN cables, Adaptor, Connector and Spliter, Cabinet, PATCH CORD, TOOLS, Coaxial cablesÂ
Fiber Optic: fiber optic patch cord, PLC splitter, adapter, connector, closure, media converter, etc
Cable Assembly: USB cable, HDMI cable, VGA cable, AV cable, DVI cable, etc
All has been certified by ISO9001:2008/ROHS/CE/UL/3C and so on.
FAQ
Q1. How can we know the products' quality?
We suggest you to buy a sample product first before placing a big order. Or you could talk to us online or send us an email if you need more detailed information for the specific product.
Q2. How about the sample fee and sample time?
For sample order, it is about 3-7 working days. As for sample fee is charged according to the size of the product.
Q3: Can you help me make my own design?
Yes, Sure. We can make OEM and ODM items for you as long as you can tell us your idea or provide pictures. We have done many OEM projects for our customers.
Q4. What is your payment term?Â
A. T/T, L/C, Western Union, money gram and PayPal are all accepted.Â
B. For bulk production: 30% deposit pay before mass production, and 70% pay before shipment.
Q5. Can we visit your factory?
Yes, you can. You are most welcome to visit our factory and office. Please let us know before coming over and we will provide detailed route and hotel booking suggestions.
Full Spectrum Led Grow Light For Greenhouse/Hydroponics/Plants Growing
What is Full spectrum led chip ?
It is the newest trend for LED Horticulture Lighting. Advanced Led Grow Lights chip, not provide sigle color,provide broad spectrum 400nm~840nm ,simialr with sun light ,but most is red and blue ,it is best for Led Horticulture Grow Lights.This is a revolutionary step for LED Grow Lights which have previously been unable to act as the sole light source for the indoor garden.Suitable for all stages of plant growth.
How to Select the Best Grow Light for your Greenhouse?
The plant needs light to thrive cause the light is essental for photosynthesis.without it,plants can not make food.but light can also be too intense,too hot or last too long for growing healthy plants.plant growth accelerates with abundant light because more of the plant`s leaves have exposure,which means more photosynthesis.in the winter,days are not long enough,but many plants still need 12 hours or more of light per day.now,adding led grow lights to your greenhouse is an nice choice if you live in the north, and can not get enough daylight in winter.you might be take HID into consideration,cause it has high output and cover a wide area.but now,we providing you some dfferent.the newest type of grow lights use LED technology.
Provides Maximum Light Density and optimizing spectrum(410nm-740nm,white)
As we know that the plants need more light from the blue side of the spectrum during their seedling stage and when developing foliage and require light from the orange to red side of the spectrum while inblooming and fruiting phases. We adopting lastest intergrated COB technology, white , more red and blue PAR(410-740nm) per Watt than any other lighting fixture for the best color uniformity.
Dual Veg and Bloom for plant growth and bloom
The Led grow lights feature selectable VEG and BLOOM light spectrums to deliver maximum performance from seeding through the flower stage and finally harvest.
Increase yields and potency
Using high quality lense that hyper-focus the lights on your canopy.the photons are beamed directly to the plants.this gives growers the ability to get greatest possible crop yield.
Reduce your costs with energy efficiency
Energy-efficient cannabis grow lights cost between 40%-60% less to operate compared to HID lam year
Led Grow Light also eliminate the needs for ballasts and reflectors while they minimize the cooling systems,accelerating your payback.you will see the electrical bills trimmed by approximately half,year after year.
Installs and operates simply
the input voltage is AC100V-240V,fit for the world standard,built-in power supply.do not need other equipment,just access to the Plug,the lamp will be work smoothly. The Led Grow Lighting is small size,just few inches and easy to install.it is the good option for some greenhouse.
Long lifespan
Using built-in quiet fans and the shutter in the wind,induced draftfrom all sides.runs with quiet. Useadvanced isolation power supply and soft start protection technology, to prevent the high voltage when turn on the light from damagingthe lamp body.
Philizon LED lights have the HIGHEST PAR/LUMEN OUTPUT PER WATT of any LED grow lights! 2x-3x the intensity of any other lights!
SUPERIOR 12-band full spectrum from the depths of UV to the heights of IR - The most complete and efficient spectral output available
Selectable VEG/FLOWER switches with 8x high speed whisper quiet fans plus ALL NEW upgraded aluminum cooling heat sinks
1600w HPS replacement with 8.5ft x 7.5ft coverage at 3.28feet height PERFECT for massive commercial applications or using multiple units for even coverage.COMPLETE 3 YEAR WARRANTY plus our exclusive 90 DAY SATISFACTION OR RETURN GUARANTEE
Application
Greenhouse, Hydroponics, Aeroponics, Home Garden, Farm, Vegetable Shed, Botanic Garden, Flower Exhibitions, Horticulture, Hydroponics, Hemp Cultivations , Medical Plants Cultivations, etc.
Warranty
1.3years Manufacturer's Warranty for defective items within 3 years
2.We will guide you to fix it if gets small problems within 3 years
3.We will send you new items if the products are totally broken since technical or quality matters within 3 years
4.Retun and Refund: we provide 30days no question item return, we will refund all your money after we get the item, and we both provide 50% of the return shipping fee.
Led Horticulture Grow Lights,Full Spectrum Indoor Grow Lights,Indoor Grow Lights,Led Grow Lamps
Shenzhen Philizon Technology Co.,Ltd. , http://www.philizon.com