Cement paste mixer composition and how to install - Database & Sql Blog Articles

Single chip microcomputer STM32L151CCU6

Mobile phone crystal 3.2*2.5mm 3225 26M (26.000MHZ) 7.5PF 10PPM 20PPM 30PPM

product name

NJ-160

Cement paste mixer

Pulp mixer

Cement paste mixer price

Production

Product

Say

Bright

【product name】

NJ-160A

Cement paste mixer

[Introduction]

NJ-160A

type

Cement paste mixer

Is implementation

GB1346-89

One of the specified special equipments will be mixed with cement and water according to the standard and then stirred into a uniform test slurry for the determination of cement standard consistency, setting time and the production of stability test blocks. It is a cement plant and building construction. One of the necessary and indispensable equipment for the unit, relevant professional colleges and research institutes.

Main Specifications】

:

1

Stirring leaf revolution

:

62±5r/min
2

Stirring leaf revolution

:

125±10r/min
3

Stirring leaf rotation slow

:

140±5r/min
4

Stirring leaf rotation speed

:

258±10r/min
5

,Motor Power:

fast:

370 W

Slow speed:

170W

【The main structure】

1

Structure: Mainly composed of two-speed motor, transmission box, main shaft, eccentric seat, mixing blade, stirring pot, base, column, support, cover, and program controller.

[lifting and installation]

1

This machine does not have a lifting device and can be manually transported.

2

The machine is installed on the flat concrete platform and the floor is covered with a thick layer.

5~8mm

rubber Board.

3

, power supply and safety grounding

2m

Long power inlet and one four-pin socket. It must be ensured that the phase and neutral lines are correct for power. The electrical insulation of the electrical equipment has reached the standard at the factory. In order to ensure the safety of electricity, please use the safety grounding mark of the fuselage not less than

1

Mm

2

The multi-strand plastic copper core wire of the cross section is reliably grounded.