The results of the national “test†in the past two years have made every city have to face a difficult choice: to choose domestic brands according to the government's encouragement, but most Chinese LED lighting companies do not have the ability to produce high-quality LED lights; Foreign brands can guarantee quality, but they face a higher cost burden.
This is reminiscent of the exciting speculation that broke out in May 2009 when the “Ten Cities and Ten Thousand Miles†was just announced. The relevant forecast data at that time was: China needs 1.4 million baht in 2009, 2.4 million baht in the world, and future market potential. The big picture is obvious. Under the encouragement of this great situation, at least 3,000 companies in China are currently involved in the LED industry. But in fact, in the 21 pilot cities of the “Ten Cities and Ten Thousand Cities†in 2009, the installed LED street lights (including tunnel lights) were only about 222,000 baht. The situation in 2010 was also unsatisfactory.
At present, the quality of LED street lamp products produced in China is uneven, and there are technical instability problems in light efficiency, illumination uniformity, color rendering, and service life, especially the light decay is too serious. In some cities, LED street lights are not installed for two or three months. “An LED energy-saving lamp can achieve 50% to 80% energy-saving effect, and 30% of the difference comes from the quality of the product.†Shi said that at present, the domestic LED lamp manufacturers are mixed and lead to chaotic competition in the industry.
An interesting phenomenon is that in the World Expo and the 2008 Olympic Games and the 2010 Asian Games, almost all foreign brands such as CREE and Philips are used, and domestic LED brands are rarely seen. “Because at such an international conference, quality is more important than everything else.†This is something that everyone in the industry knows.
After nearly two years of national "tests", the problem facing each city is still the question of what LED brand to choose. This is an unavoidable flaw: on the one hand, the government's encouragement policy for the LED lighting market continues to increase, on the other hand, the LED urban lighting market has great potential, and each city vigorously cultivates LED enterprises in the region, but the initial stage of industrial development determines Most Chinese LED lighting companies do not have the ability to produce high quality LED lights. Is it necessary to have a high quality business?
The positions of some key cities have undergone subtle changes and began to favor quality. But high quality means high cost. “Shanghai wants to promote LEDs, but the cost is still the biggest obstacle. But if you choose high-quality LED lights, these cities will face huge cost pressures.†Shao Zhiqing, deputy director of Shanghai Economic and Information Technology Committee It shows the biggest difficulty in LED city lighting. An industry-recognized fact: Even if it is a wafer-manufacturing company, it is already a large-scale enterprise in China, and its product price is less than half of the price of Cree's products, and less than 1/4 of the price of Japan's Nichia products. This is the price of high quality. Kunming recently calculated an account, taking Kunming as an example, according to 0.483 yuan / kWh, 1.6 million ç› LED street lights can save about 80 million yuan in electricity costs, but the installation of LED street lights count the cable, workers installation costs, and street lamp costs, Need to spend 4.8 billion more.
“Without government subsidies, it is estimated that most people will not use LED lights.†This is another consensus in the industry. But what makes LED companies even more embarrassed is that when other types of energy-saving products enjoy direct subsidies from the national government (such as air conditioners, automobiles, etc.), the LED industry has no national standards, even if the government wants to issue subsidies, there is no standard to rely on. . At present, the energy-saving subsidies for LED lighting are all paid by the cities themselves, so they are generally subsidized to LED companies in their own regions. This is also the reason why the city's position is biased towards local brands.
This is reminiscent of the exciting speculation that broke out in May 2009 when the “Ten Cities and Ten Thousand Miles†was just announced. The relevant forecast data at that time was: China needs 1.4 million baht in 2009, 2.4 million baht in the world, and future market potential. The big picture is obvious. Under the encouragement of this great situation, at least 3,000 companies in China are currently involved in the LED industry. But in fact, in the 21 pilot cities of the “Ten Cities and Ten Thousand Cities†in 2009, the installed LED street lights (including tunnel lights) were only about 222,000 baht. The situation in 2010 was also unsatisfactory.
At present, the quality of LED street lamp products produced in China is uneven, and there are technical instability problems in light efficiency, illumination uniformity, color rendering, and service life, especially the light decay is too serious. In some cities, LED street lights are not installed for two or three months. “An LED energy-saving lamp can achieve 50% to 80% energy-saving effect, and 30% of the difference comes from the quality of the product.†Shi said that at present, the domestic LED lamp manufacturers are mixed and lead to chaotic competition in the industry.
An interesting phenomenon is that in the World Expo and the 2008 Olympic Games and the 2010 Asian Games, almost all foreign brands such as CREE and Philips are used, and domestic LED brands are rarely seen. “Because at such an international conference, quality is more important than everything else.†This is something that everyone in the industry knows.
After nearly two years of national "tests", the problem facing each city is still the question of what LED brand to choose. This is an unavoidable flaw: on the one hand, the government's encouragement policy for the LED lighting market continues to increase, on the other hand, the LED urban lighting market has great potential, and each city vigorously cultivates LED enterprises in the region, but the initial stage of industrial development determines Most Chinese LED lighting companies do not have the ability to produce high quality LED lights. Is it necessary to have a high quality business?
The positions of some key cities have undergone subtle changes and began to favor quality. But high quality means high cost. “Shanghai wants to promote LEDs, but the cost is still the biggest obstacle. But if you choose high-quality LED lights, these cities will face huge cost pressures.†Shao Zhiqing, deputy director of Shanghai Economic and Information Technology Committee It shows the biggest difficulty in LED city lighting. An industry-recognized fact: Even if it is a wafer-manufacturing company, it is already a large-scale enterprise in China, and its product price is less than half of the price of Cree's products, and less than 1/4 of the price of Japan's Nichia products. This is the price of high quality. Kunming recently calculated an account, taking Kunming as an example, according to 0.483 yuan / kWh, 1.6 million ç› LED street lights can save about 80 million yuan in electricity costs, but the installation of LED street lights count the cable, workers installation costs, and street lamp costs, Need to spend 4.8 billion more.
“Without government subsidies, it is estimated that most people will not use LED lights.†This is another consensus in the industry. But what makes LED companies even more embarrassed is that when other types of energy-saving products enjoy direct subsidies from the national government (such as air conditioners, automobiles, etc.), the LED industry has no national standards, even if the government wants to issue subsidies, there is no standard to rely on. . At present, the energy-saving subsidies for LED lighting are all paid by the cities themselves, so they are generally subsidized to LED companies in their own regions. This is also the reason why the city's position is biased towards local brands.
The speaker wire harness most are used in automobile, house applicance ,audio,video,radio,fuse wire ,game machine.Yacenter has experienced QC to check the products in each process, from developing samples to bulk, to make sure the best quality of goods. Timely communication with customers is so important during our cooperation.
If you can't find the exact product you need in the pictures,please don't go away.Just contact me freely or send your sample and drawing to us.We will reply you as soon as possible.
Speaker Wire,Custom Speaker Wiring Harness,Speaker Wiring Harness,Car Speaker Wire Harness
Dongguan YAC Electric Co,. LTD. , https://www.yacentercns.com