Features
² Shrink ratio: 3: 1
² Flexible, flame retardant outer layer, environmentally friendly, low temperature shrinkable, UV resistant
² Shrink temperature: 60degree~105degree
² Continuous operating temperature: -45degree~125degree
² RoHS compliant
² Standard colors: Black, other colors are available on request
Technical Data
| Property | Typical data | Test method/condition |
| Tensile strength | ≥10.4MPa | ASTM D 2671 |
| Elongation at break | ≥300% | ASTM D 2671 |
| Tensile strength | ≥7.3MPa | 158ºC×168h |
| Elongation at break | ≥100% | 158ºC×168h |
| Longitudinal change | -8%~+8% | ASTM D 2671 |
| Flammability | Self-extinguishing in 60 sec. | AMS-DTL-23053/4 |
| Voltage withstand(Rated voltage 600V) | 2500V,1min no breakdown | UL 224 |
| Heat shock | No cracks, no dripping | UL 224,250ºC×4h |
| Dielectric strength | ≥15kV/mm | IEC 60243 |
| Volume resistivity | ≥1014Ω.cm | IEC 60093 |
Adhsive Technical Data
| Property | Typical Data | Test method/condition |
| Softening point | 95±5ºC | ASTM E 28 |
| Water absorption | <0.5% | ASTM D 570 |
| Peel strength(PE) | ≥120N/25mm | ASTM D 1000 |
| Peel strength(AI) | ≥80N/25mm | ASTM D 1000 |
Dimensions
| Size | As supplied ID(mm) D | After full recovery(mm) | Standard package | |||
| mm | inch | ID d | Wall thickness w1 | Thickness of adhesive w2 |
(m/spool,   m/pc) | |
| Φ2.4 | 3/32 | ≥2.4 | ≤0.80 | 0.85±0.15 | 0.35±0.08 | 200 |
| Φ3.2 | 1/8 | ≥3.2 | ≤1.00 | 0.95±0.15 | 0.35±0.08 | 200 |
| Φ4.8 | 3/16 | ≥4.8 | ≤1.60 | 1.10±0.15 | 0.40±0.08 | 100 |
| Φ6.4 | 1/4 | ≥6.4 | ≤2.20 | 1.20±0.15 | 0.45±0.08 | 100 |
| Φ7.9 | 5/16 | ≥7.9 | ≤2.70 | 1.35±0.15 | 0.50±0.08 | 100 |
| Φ9.5 | 3/8 | ≥9.5 | ≤3.20 | 1.45±0.20 | 0.50±0.08 | 50 |
| Φ12.7 | 1/2 | ≥12.7 | ≤4.20 | 1.70±0.20 | 0.50±0.08 | 25 |
| Φ15.0 | 5/8 | ≥15.0 | ≤5.20 | 1.80±0.20 | 0.55±0.10 | 25 |
| Φ19.1 | 3/4 | ≥19.1 | ≤6.30 | 2.00±0.20 | 0.55±0.10 | 25 |
| Φ25.4 | 1 | ≥25.4 | ≤8.50 | 2.10±0.25 | 0.55±0.10 | 25 |
| Φ30.0 | 1-1/4 | ≥30.0 | ≤10.20 | 2.20±0.25 | 0.60±0.10 | 1.22 |
| Φ39.0 | 1-1/2 | ≥39.0 | ≤13.50 | 2.40±0.25 | 0.60±0.10 | 1.22 |
| Φ50.0 | 2 | ≥50.0 | ≤17.00 | 2.70±0.25 | 0.70±0.10 | 1.22 |
Note:Non-standard dimensions and package are available on request
USB 2.0 is a USB interface standard released in 2000 with a theoretical maximum transmission speed of 480Mbps (about 60MB/s). The port has four cables (five cables for MicroUSB and MiniUSB), and the maximum output current is 0.5A. USB 2.0 is currently the most common version of USB port, almost all computers have USB 2.0 port, most USB devices also support USB 2.0. USB 2.0 hub. The device can provide USB high speed or full speed connection on the uplink port. The device also provides USB high-speed, full-speed, or low-speed connections on the downlink port. When the uplink port is connected to an electrical environment that supports only high-speed, full-speed, and low-speed connections, the high-speed, full-speed, and low-speed USB connections on the downlink port are enabled. When the uplink port is connected to an electrical environment that supports only full or low speed connections, the USB high-speed connection on the downlink port is disabled. USB 3.0 Hubs is higher than usb 2.0 in terms of transmitting data.
Usb 2.0 Hubs,7 Port Usb 2.0 Hub,Wireless Usb 2.0 Hub,Usb C To Usb 2.0 Hub
Henan Yijiao Trading Co., Ltd , https://www.yjusbhubs.com