Yzr Slip Ring Three Phase Hoist Electric Motors

YZR, YZ series metallurgical and crane ac induction motor

1. General
1.1 YZR and YZ series wound rotor and squirrel-cage rotor three-phase asynchronous motor for lifting and metallurgy is suitable for the power drive of the lifting machine and other similar equipment, with high overload capability and mechanical strength, and it is also suitable for short-time or intermittent character of service, the equipment with frequent starting, braking and obvious shock and impact.
1.2 The power grade and the installation dimensions of the motor are in accordance with the recommended standard of IEC 72; The correlation between the power grade and the installation dimensions is similar with Japan JEM1202 and Germany DIN42681, most of which can be exchanged. YZR series wound rotor three-phase asynchronous motor for metallurgy and lifting is in accordance with the specification of professional standard JB/T10105-1999 and YZ series squirrel-cage rotor three-phase asynchronous motor for metallurgy and lifting is in accordance with the professional standard.
2. Operation condition
The motor can run normally when the elevation not more than 1000m. The environment temperature for class F is from -20 to 40 Celsius degree, for H class from -20 to 60 Celsius degree. Relative humidity less 90%.

3. Basic mode
Rated voltage: 380V rated frequency: 50HZ.
Protection grade: IP44 or IP54 insulation level: F or H
Cooling mode: IC410 or IC411
Base operating duty: S3-40%
Installation mode of the motor: B3(112-450), B5(112-250), V1(112-315)
Note: The following are optional: Over-temperature protection, dampproof heating belt, electromagnetism brake, coder, overspeed switch.


Our Servies

WE ARE READY

Q: Do you offer OEM service?
A: Yes.

Q: What is your payment term?
A: 30% T/T in advance, 70% before delivery. Or irrevocable L/C.

Q: What is your lead time?
A: About 10-45 days after receiving deposit or original L/C.

Q: What certifiicate do you have?
A: We have CE, ISO, CCC and so on.


WHY CHOOSE US

WHAT WE DO AT PINNXUN
Stamping of lamination
Rotor die-casting
Winding and inserting - both manual and semi-automatically
Vacuum varnishing
Machining shaft, housing, end shields, etc
Rotor balancing
Painting - both wet paint and powder coating
Motor assembly
Packing
Inspecting spare parts every processing
100% test after each process and final test before packing. YZR, YZ series metallurgical and crane ac induction motor

1. General
1.1 YZR and YZ series wound rotor and squirrel-cage rotor three-phase asynchronous motor for lifting and metallurgy is suitable for the power drive of the lifting machine and other similar equipment, with high overload capability and mechanical strength, and it is also suitable for short-time or intermittent character of service, the equipment with frequent starting, braking and obvious shock and impact.
1.2 The power grade and the installation dimensions of the motor are in accordance with the recommended standard of IEC 72; The correlation between the power grade and the installation dimensions is similar with Japan JEM1202 and Germany DIN42681, most of which can be exchanged. YZR series wound rotor three-phase asynchronous motor for metallurgy and lifting is in accordance with the specification of professional standard JB/T10105-1999 and YZ series squirrel-cage rotor three-phase asynchronous motor for metallurgy and lifting is in accordance with the professional standard.
2. Operation condition
The motor can run normally when the elevation not more than 1000m. The environment temperature for class F is from -20 to 40 Celsius degree, for H class from -20 to 60 Celsius degree. Relative humidity less 90%.

3. Basic mode
Rated voltage: 380V rated frequency: 50HZ.
Protection grade: IP44 or IP54 insulation level: F or H
Cooling mode: IC410 or IC411
Base operating duty: S3-40%
Installation mode of the motor: B3(112-450), B5(112-250), V1(112-315)
Note: The following are optional: Over-temperature protection, dampproof heating belt, electromagnetism brake, coder, overspeed switch.


Our Servies

WE ARE READY

Q: Do you offer OEM service?
A: Yes.

Q: What is your payment term?
A: 30% T/T in advance, 70% before delivery. Or irrevocable L/C.

Q: What is your lead time?
A: About 10-45 days after receiving deposit or original L/C.

Q: What certifiicate do you have?
A: We have CE, ISO, CCC and so on.


WHY CHOOSE US

WHAT WE DO AT PINNXUN
Stamping of lamination
Rotor die-casting
Winding and inserting - both manual and semi-automatically
Vacuum varnishing
Machining shaft, housing, end shields, etc
Rotor balancing
Painting - both wet paint and powder coating
Motor assembly
Packing
Inspecting spare parts every processing
100% test after each process and final test before packing.

Foli Vape

The official manufacturer of FOLI brand has the most complete disposable electronic cigarette, Pod changing atomizing Vape Kit, Vape Pod;

FOLI specialized in vaping industry for 8 years. FOLI brings the ultimate product experience to consumer s meanwhile FOLI has it's gorgeous appearance and patented component structure. FOLI is an amazing time of everyday. It's everything is possible! Colorful LED Lighting, Bright Colors, Polychrome Stickers & Unique Design, Aerodynamics design with high quality e-juice. Let every FOLI consumer experience the ultimate smooth new vaping experience!

Interesting
For Vaping, we hope it to be flexible and imaginative.
FOLI brings the ultimate product experience to consumers meanwhile FOLI has its gorgeous appearance and patented component structure.
FOLI is an amazing time of everyday. It's everything is possable!

New Experience of Vaping

Colorful LED Lighting

Bright Colors

Polychrome Stickers & Unique Design

Aerodynamics design with high quality e-juice.
Let every FOLI consumer experience the ultimate smooth new vaping experience!

Foli Vape,Disposable Vape Mesh Coil,Disposable Vape Pens,Pocket Size Disposable E Cigarette

TSVAPE Wholesale/OEM/ODM , https://www.tsecigarette.com