Sliding line indicator professional manufacturer,Firkte slip line indicator your ideal choice!

Sliding line indicator professional manufacturer,Firkte slip line indicator your ideal choice!

Sliding Line Indicator Sliding Line Indicator Model: ABC-hcx-100/3000V

Other product name: Slip line indicator, trolley line indicator, trolley contact indicator, overhead crane indicator, traffic indicator, three-phase power indicator, LED trolley indicator, trolley contact indicator, traffic signal indicator

Sliding line indicator professional manufacturer,Firkte slip line indicator your ideal choice!

Lamp plate diameter: 100
Dimensions: 550*200*100
It is used for real-time monitoring of signal indications of three-phase power supply for lifting equipment such as road cranes and gantry cranes to prevent the adverse consequences caused by the lack of phase of equipment power supply. This product is made of LED imported ultra-high light emitting diodes. It is divided into three colors (yellow, green and red) to indicate the three phases of the power supply. The visible distance is about 300 meters, and the service life is more than 100,000 hours, which is superior to other similar products. The shell adopts electroplated cold-rolled plate and electrostatic powder spray process, which is beautiful and exquisite, and has excellent outdoor anti-corrosion performance. Low power, power consumption. The lamp body can be installed side-by-side with the trolley wire, or it can be installed on both sides of the wall. The angle can be arbitrarily adjusted. The large viewing angle is 150 degrees, which can be seen by the driver and the ground staff. Protection class is IP56.
Sliding Line Indicators Technical Indicators: Sliding Line Indicators Professional Manufacturers, Ficker Skid Indicators Your Ideal Choice!
Voltage: 3000V/AC +25/-15% 50-60HZ
Power: 10W
Working temperature: -40-70 degrees Celsius Humidity: 10%-90%
Lifetime: ≥100000 hours Lamp surface diameter: 100mm
Viewing angle: >150 degree viewing distance: >300m
Wiring method: Y connection

Sliding line indicator professional manufacturer,Firkte slip line indicator your ideal choice!

Sliding line indicator physical group diagram
Sliding line indicator professional manufacturer,Firkte slip line indicator your ideal choice!

Plug In Series​ Diode

In the rectifier circuit; the use of diodes in series can increase the back pressure withstand value (usually the sum of the back pressure of all diodes, but it is best to use diodes of the same specification).
In the voltage stabilization circuit; the series connection of the diode is equal to the sum of the voltage stabilization value of the diode. The use of diodes in parallel is theoretically the sum of rated currents, but considering that it is impossible to be absolutely symmetrical, they can only be used below 80% of the total.

TVS transient suppressor diodes work in the same way as regulator diodes, but there are structural differences.The biggest difference is that the PN junction area composed of the general regulator diode is very small, it can withstand the reverse current is small.

Transient Voltage Suppressor,Transient Voltage Suppressor Diode,Series diode

Changzhou Changyuan Electronic Co., Ltd. , https://www.changyuanelectronic.com