The radio may come from a variety of consumer electronics, such as cordless phones, Bluetooth headsets, microwave ovens and even electric garage doors, etc., which may interfere with the normal operation of Wi-Fi wireless signals.
Solution: Remove or move away from these devices. If the wireless signal is restored or becomes stronger, you can find out the source of the problem.
Insufficient radiationEven if there are no other interfering devices, it is possible that the Wi-Fi network itself has insufficient radiation coverage, resulting in instability of the wireless network. As you know, the link status of the Wi-Fi network is closely related to the distance between the terminal and the AP.
Solution: Minimize metal obstacles that affect the link, or shorten the distance from the AP. A more feasible approach is to consider installing an antenna for better wireless transmission.
Three links to the wrong networkIf you have 2 Wi-Fi networks with the same network name in the wireless network environment you are using, then you are likely to link to the wrong network and affect your normal Internet access. In this case, there are often results in signals interfering with each other or insufficient radiation range. In addition, if another network is shut down, it will also affect your computer's Internet access.
Four network drivers or firmware are not upgraded in timeEvery computer connected to a Wi-Fi network must use its built-in network module and related drivers to achieve wireless Internet access. The driver affects the various functions of the Wi-Fi hardware. In addition, the wireless router and the firmware responsible for access are also the same as the driver, which affects the wireless Internet function.
Solution: Uninstall the outdated drivers and firmware, and download and install the latest version of the driver for the corresponding wireless module components on the official website.
Five software is not compatibleIf the computer does not have a link to the wireless network from the beginning, it is very likely that you are installing incompatible software on your computer. These software include operating system patches, operating system service components, or other software that affects the system network.
Solution: Make a record every time you upgrade or install the software, and uninstall the incompatible software, or simply restore the system.
Six routers (access points) are overloadedSome people have previously reported that overloading routers or access points can affect the speed and quality of wireless Internet access. The main reasons for the overload of the router are: online games, BT downloads or too many computers connected to the network. In theory, large-scale data transmission generally causes the router to temporarily drop. In addition, if the temperature of the router is too high, it may also drop the line.
Solution: The place where the router is installed must have a good ventilation environment. If the router is not suitable for your use (such as requiring high data transmission capacity), consider replacing the router.
CIXI MEMBRANE SWITCH FACTORY , https://www.cnjunma.com