[Home Theater Network HDAV.com.cn] 1. Although from the wiring to the speaker position, it seems that all the steps can be done by themselves, but unless you read the instructions, otherwise your practice may reduce the performance of the sound, or even get Bad equipment. Therefore, whether the manual is written or enthusiastic, you should read it first.
2. A suitable rack is necessary. One machine per machine. The frame ensures vibration protection and separates each machine a certain distance, which is particularly beneficial for heat dissipation.
3. If you have to pick up the machines one by one, then put the amplifier on the top, because the amplifier produces the most heat, the most need to dissipate heat.
4. Consider that you may have to buy another equipment in the future. When buying a rack, you should buy more layers to avoid double investment.
5. If the rack has wheels, it is convenient to clean the floor under the rack, but if the rack has nails, it can be fixed, the sound effect will be better, and it is better to choose two suitable advantages.
6. Check whether the rack can bear the weight, so that the sand can be sanded or added with special metal to increase the weight to prevent earthquake. In the hollow structure of the rack (such as the pillar), sand is blown to prevent the sound from being loud when the volume is large.
7. The choice of the rack should also be noted that the glass is very beautiful, but the medium density fiberboard (MDF) is better, it is better to have nails or damping glue, but if you use a glass frame and have children, It must be fixed more firmly.
8. There are other ways to benefit your equipment. Putting the CD on the nails (such as the nails produced by Audioquest), a special platform, or a board made of wood chips or even marble plates can help reduce vibration.
9. The record player is more prone to vibration. If it is a wooden floor room and the floor is also transmitting vibration, try to fix the frame to the wall, especially if you want to listen to rock in the morning when you get up in the morning.
10. The speaker bracket is also very particular. If it is a small hall, generally use bookshelf speakers, the bracket is very important, you should buy the best shelf, the more stable, the harder the better.
11. The level of the nail should be adjusted, and then fixed with the wrench (usually attached to the equipment), be careful not to over-tighten. For some screws with poor quality, tightening too tight will cause sliding.
12. Some audio cables are directional. Pay attention to the direction indicated by the arrow on the plug. For example, the signal input of the CD player is input to the amplifier, and the signal of the amplifier is input to the speaker.
13. You can screw the Phillips screw on the wooden floor first, then insert the nail into the screw. Pay attention to the adjustment level.
14. A lot of sound, whether installed on the ground or on the shelf, benefits from a solid ground.
15. Small speakers are mounted on the shelf with foot nails or with damping glue. It is best to follow the manufacturer's recommendations, but you can test it first.
16. If you want to mount the speaker on the wall, the wall must be stable and the tweeter should be positioned as high as the ear when you are listening.
17. Do not put potted plants, table lamps or porcelain statues on the speakers. Some of them may vibrate with music, which is distracting.
18. If you are indoors, the speaker is too close to the wall to make the bass low. If it is outdoors, the bass will be too heavy. In any case, do not place the speaker in a corner, which will make the bass turbid.
19. A general rule is that the distance between the speakers should not be farther than the distance from the speakers to the listeners. However, a distance of at least 1.5-2 meters is required between most speakers to produce a good sound image position, and if the distance is too far, a hollow effect is generated.
20. Adjust the direction of the speaker until the image is three-dimensional. The vertical lines leading from the front panels of the two speakers should cross at the position you listen to. More fresh and fun home theater information, please pay attention to home theater network http:// (WeChat: cnhifi), the country's most influential home theater audio player interactive media website.
Since AC power cord is output of high voltage electric power, there is a risk of electric shock injury, therefore, All the AC power cord must comply with safety standard to produce. AC (Alternating Current) Power cord is to transmit high voltage. It is used to drive machinery or home appliances.
AC Power cord,power cable, batter cable, power cord
ETOP WIREHARNESS LIMITED , https://www.etopwireharness.com