With the continuous advancement of society, consumers are increasingly demanding security doors, and more families are willing to install more intelligent security doors to enhance home security. Especially with the development of electronic technology and the emergence of various new technologies, the traditional security door can no longer meet the requirements. In response to consumer demand for high-end security doors, this project proposes a security door based on a combination of single-chip microcomputer and GSM network module, which can realize more intelligent anti-theft and effectively meet the needs of consumers.
1. System overall designThe system adopts embedded technology, which is mainly composed of STM32 single-chip microcomputer and GSM short message module, and uses data fusion and processing of reliable and mature GSM mobile network information. The infrared reflection device senses the switch of the door, and an abnormality is sent to the single-chip processing in time, and the alarm device can immediately perform an alarm, and the GSM network immediately sends a short message, so that the system tends to be perfect. It can be used for fingerprinting or texting when the owner enters and exits, making travel easier. The schematic diagram of the system is shown in Figure 1.
Figure 1 Schematic diagram of the STM32 network security door system
2, system hardware designThe network security door system of STM32 is divided into: power module, GSM module, infrared pair tube module, sound and light alarm module and fingerprint identification module according to the functions to be realized by each module. The system block diagram is shown in Figure 2.
(1) Power module: The power module is an essential condition for the whole device. The Li-Po battery is used in this design. The output voltage is 11.1V, which is converted into a stable 5V power supply through the DC/DC conversion circuit.
(2) GSM module: The GSM module has the function of sending short messages and voice calls. The GSM module used in the system is the SIM900A industrial grade dual-band GSM module, which supports data, voice, SMS and fax.
(3) Infrared tube module: When the receiving tube can receive the infrared of the transmitting tube, the receiving tube is turned on, and outputs a low level at the output end. When the position of the transmitting tube and the receiving tube is staggered, the output is output at a high level. level.
(4) Sound and light alarm module: use buzzer to make sound alarm, LED light to realize light alarm.
(5) Fingerprint identification module: Identification is performed by comparing different fingerprint features.
Figure 2 STM32 network security door system block diagram
Disposable Vape,Disposable Vape Flum Float,Randm Vape,Iplay Vape
Nanning Nuoxin Technology Co., LTD , https://www.nx-vapes.com