Underground pipeline locator technology ratio

Product introduction:
The underground pipeline locator technology is based on the principle of electromagnetic induction to detect the precise direction and depth of underground metal pipelines and cables and the fault points of pipeline skins. The intelligent HT-6600B underground pipeline locator intelligent full Chinese characters, graphic operation instructions and sound frequency indication Make it the easiest to use pipeline locator today. The transmitter's built-in ohmmeter automatically measures loop resistance and continuous automatic output impedance matching to ensure optimal output matching. Depending on the needs of the actual application, the GH-6600B underground pipeline locator can be equipped with coupling clamps for the search of the path of the live cable without having to power off. The GH-6600B underground pipeline locator uses the 50Hz detection function of the receiver, and can also track the 50Hz power frequency signal sent by the running cable. It is truly multi-purpose and has the best performance-price ratio.
Product nickname:
GH-6600B underground pipeline locator, underground pipeline detector
Features:
(1) Pipeline positioning: Select the peak method and use parallel antenna positioning to quickly track the target pipeline. When the pipeline is above the pipeline, the signal is the largest and both sides are reduced. The trough method is selected, and the vertical antenna is used for positioning. When there is no adjacent pipeline and interference source, the positioning is more accurate and reliable. When the receiver is above the pipeline, the signal is the smallest and the signals on both sides are large.
(2) Depth measurement: directly measure depth in direct connection mode. Under normal circumstances, the error is about 10%. Place the receiver directly above the pipeline, adjust the gain so that the bar display value is around 600 ~ 800, press the depth button, the receiver shows the depth of the pipeline under test.
(3) Current measurement: Since the current value in the pipeline under test does not change with depth, the current measurement of the target pipeline helps determine the target pipeline and identify the T-tube branch. In general, it is only suitable for direct connection mode.
Technical Parameters:

1, receiver operating frequency: low frequency, intermediate frequency, high frequency, RF, 50Hz passive AC frequency antenna mode: wave valley method (vertical coil), peak method (horizontal coil)
Sound indication: FM tone current indication as a function of signal strength: Display the effective current value of the cable under test (unit: mA)
Working temperature: -10 ° C - 40 ° C
Battery model: 6 charge battery indicator: graphic display battery life: continuous work > 8 hours; intermittent work > 16 hours size: 70 × 20 × 11CM
Weight: 3 kg (with battery)
Signal strength indication: ladder diagram, digital range 0-999
Gain control: manual adjustment Dynamic range is 100db
Detection depth: the maximum depth of investigation is not less than 5 meters (direct connection method)
Maximum detection distance: cable with good insulation up to 15KM in direct connection
Depth measurement: press the depth key, three digits display, the maximum measurable depth is 2.5 meters accuracy *: low frequency: ± (1 - 5)% ≤ 2.5 meters RF: ± (5 - 12)% ≤ 2.5 meters
*Depends on the site environment, the shape of the non-concentric lines, the number of adjacent pipelines, and the return current of the soil

2, transmitter working frequency: low frequency, intermediate frequency, high frequency, RF working mode: direct connection method, coupling method, induction method matching load: 5 ohm - 3000 ohm impedance display: five digits overheating overcurrent: automatic protection power output: Low, mid, and high (maximum output power is not less than 5W)
Battery type: 8 rechargeable batteries Battery life: 8 hours to 16 hours of continuous operation depends on the frequency of use, output power Intermittent operation 12 hours to 24 hours depending on the frequency of use, output power Operating temperature: -10 ° C - 40 ° C
Size: 16 × 16 × 39CM
Weight: 4 kg (with battery)

ZGAR Aurora 500 Puffs

ZGAR Aurora 500 Puffs


ZGAR electronic cigarette uses high-tech R&D, food grade disposable pod device and high-quality raw material. All package designs are Original IP. Our designer team is from Hong Kong. We have very high requirements for product quality, flavors taste and packaging design. The E-liquid is imported, materials are food grade, and assembly plant is medical-grade dust-free workshops.


Our products include disposable e-cigarettes, rechargeable e-cigarettes, rechargreable disposable vape pen, and various of flavors of cigarette cartridges. From 600puffs to 5000puffs, ZGAR bar Disposable offer high-tech R&D, E-cigarette improves battery capacity, We offer various of flavors and support customization. And printing designs can be customized. We have our own professional team and competitive quotations for any OEM or ODM works.


We supply OEM rechargeable disposable vape pen,OEM disposable electronic cigarette,ODM disposable vape pen,ODM disposable electronic cigarette,OEM/ODM vape pen e-cigarette,OEM/ODM atomizer device.

Aurora 500 Puffs,Pod System Vape,Pos Systems Touch Screen,Empty Disposable Vape Pod System,500Puffs Pod Vape System

ZGAR INTERNATIONAL TRADING CO., LTD. , https://www.szvape-pen.com